Magnecor is a manufacturer of technically advanced ignition wires (spark plug wires, ignition leads, high tension leads). Magnecor's head office and factory are situated in Farmington Hills, Michigan, USA (Detroit metro area).

If you are needing spark plug wires for almost any engine, or industrial application, including custom specification wire sets, individual wires or cable and parts, more than likely, we can help you.

Magnecorís product line includes:

Magnecor KV85 Competition (8.5mm) and R-100 Racing (10mm) Wires

Magnecor Electrosports 7mm and 8mm Wires

Magnecor CN Series 8.5mm and 10mm Wires

Solid wire conductor Wires

Ignition cable, quality components and tooling

 

Magnecor KV85 Competition (8.5mm) and R-100 Racing (10mm) Wires

Since 1987, progressive versions of Magnecor Race Wires Magnecor KV85 Competition (8.5mm) and Magnecor R-100 Racing (10mm) Ignition Cables, have been used extensively throughout the world by leading racers and performance minded street vehicle owners to maximize the efficiency of their vehicle's ignition system. Magnecor Race Wires are the only ignition wires that can carry the full output of racing ignition systems while providing superior EMI suppression for electronically managed engines and superior heat resistance.

Magnecor Race Wires' superior heat resistance has also made these wires ideal for use in the extreme heat experienced by commercial vehicles, industrial vehicles, industrial engines, military vehicles, motor homes, generators and burners. Marine and aircraft engines have also benefited from Magnecor Race Wires' superior RFI suppression and water sealing abilities.

Unlike the majority of ignition wire brands that have proliferated the performance market in recent years, Magnecor Race Wires are not just branded cheaply constructed generic spiral conductor ignition wires that most performance parts promoters like to include in their product lines to sell through speed shops and mass-merchandisers in the USA.

MAGNECOR KV85 (8.5mm) AND MAGNECOR R-100 (10mm) RACE WIRES ARE UNIQUE TO MAGNECOR, AND ARE TOTALLY DIFFERENT TO ALL OTHER IGNITION WIRES.  ALTHOUGH MAGNECOR RACE WIRES ARE PRIMARILY DESIGNED AND CONSTRUCTED FOR USE ON RACING VEHICLES THAT USE HIGH-OUTPUT IGNITIONS AND REQUIRE EMI SUPPRESSION, THESE WIRES CAN ALSO BE USED TO IMPROVE IGNITION PERFORMANCE ON PRODUCTION ENGINES WITH EXHAUST EMISSION CONTROLS.

Magnecor Electrosports 7mm and 8mm Wires

If your engine is standard, or you donít need the current carrying capacity and heat resistance of Magnecor Race Wires, Magnecor can also offer you a full and comprehensive line of Magnecor ELECTROSPORTS Series wires (7mm and 8mm) designed for stock and mildly modified street and marine engines. Magnecor's ELECTROSPORTS Series wires are conventional in jacket construction and contain exclusive conductors that provide excellent RFI and EMI suppression, far better than the best offered by Magnecor's competitors in the replacement and performance aftermarket. In addition, these wires feature a far superior heat resistant jacket. Like all Magnecor wires, the conductor inside the cable will last indefinitely unless severed. The price of these wires is comparable with wires sold in parts stores and mass-merchandisers, and in many cases are far cheaper and superior to domestic and import original equipment wires.

The first version of Magnecor Electrosports wires (previously Magnecor High Performance) was introduced in 1977 as replacement wires for carbon conductor wires. These wires have saved individual owners, commercial fleet and taxis operators, and alternative fuel vehicle owners millions of dollars over the years by eliminating the need to constantly replace the carbon conductor wires that are still used as original equipment replacement wires to this day.

Magnecor CN Series 8.5mm and 10mm Wires

8.5mm and 10mm wires are special application ignition wires used on land vehicles, watercraft and aircraft that need maximum RFI suppression for problem ham radios, telephone and TV equipment, 2-way radios, off-shore communication equipment, and high powered sound equipment etc. to eliminate the spark energy loss associated with all other ignition wires and suppressors used to overcome severe RFI interference. Magnecor's CN Series wires are available as KV85 CN25 (8.5mm) and R-100 CN25 (10mm).

Magnecor Solid Wire Conductor 7mm Wires

Magnecor has always provided 7mm tin plated stranded copper wire conductor wires for restorations and industrial applications. The cable used features an EPDM insulator covered with a silicone rubber jacket. The cable only can be supplied in bulk on reels containing 100 to 10,000 feet, although there is NO minimum order required for the cable.

Ignition cable, quality components and tooling

Any of Magnecorís ignition cables can be purchased loose. Quality spark plug and coil boots, terminals, connectors, numbering sleeves etc. for almost every engine that will fit any brand ignition cable can be purchased from Magnecor. There is NO minimum order. Magnecor can supply an industrial grade crimping tool to use to assemble ignition wires.

Magnecor Wire Sets

Magnecor manufactures ignition wire sets for almost every internal combustion engine (and configuration) ever produced, including those in many limited production vehicles and vehicles now out of production. Magnecor also specializes in making custom-tailored wire sets to suit customer specifications, as well as to many racing application specifications we have accumulated since 1976.

Prices are always reasonable compared with original equipment wires, although when compared with generic many-brand-name ignition wires, the prices for our Race Wires may be more. Magnecor does not manufacture any products to suit mass-merchandiser pricing structures, therefore quality is never compromised.

If you cannot find a dealer in your area, Magnecor will sell to you direct from the factory (no minimum order is required). We accept American Express, Discover, MasterCard, PayPal and Visa and COD (money order only, USA only).

 

 

Magnecor can supply spark plug wires for many makes of cars, including Acura, Alfa Romeo, American Motors, Nash, Rambler, Aston Martin, Asuna, Audi, Austin and Austin-Healey, Bertone, BMW, Buick, Cadillac, Checker, Chevrolet, GMC, Chrysler, CitroŽn, Daewoo, Daihatsu, Daimler, Datsun, DeLorean, De Tomaso, Dodge, Dodge Trucks, Eagle, Edsel, Ferrari, Fiat, Ford, Geo, Honda, Hummer, Hyundai, Infiniti, Innocenti, International Trucks, IHC, Isuzu, Jaguar, Jeep, Jensen, Kia, Lamborghini, Lancia, Land Rover, Lexus, Lincoln, Lotus, Maserati, Mazda, Mercedes Benz, Mercury, Merkur, MG, Mini, Mitsubishi, Morgan, Morris, Nissan, Oldsmobile, Opel, Packard, Pantera, Passport, Peugeot, Plymouth, Pontiac, Porsche, Rambler, Range Rover, Renault, Rolls-Royce, Rover, Saab, Saturn, Shelby Dodge, Sterling, Studebaker, Subaru, Sunbeam, Suzuki, Toyota, Triumph, TVR, Vauxhall and Envoy, Volkswagen, Volvo, Yugo and usually almost anything else ever made, or will be made.